PrintersBambu Lab A1 Combo Setup and First Prints: My Honest First Look
My A1 Combo assembly and AMS lite setup, two successful multicolor prints, measured purge waste, and the desk-space tradeoff from this hands-on first look.
PrintersBambu Lab P1S Setup and First Prints: Zero Settings Changed
A hands-on Bambu Lab P1S Combo setup guide covering AMS connections, calibration, firmware, zero-setting first prints, and measured multicolor purge waste.
PrintersSnapmaker U1 Setup and First Prints: Honest Hands-On First Look
A hands-on Snapmaker U1 setup guide covering four-toolhead assembly, numbered filament routing, a 35-minute calibration, and the first multicolor dragon.
GuidesxTool P3 Setup Guide: First-Run Mistakes to Avoid
Before you turn on an xTool P3, remove the shipping hardware, fill the coolant correctly, set up air handling, and run the optical-path test. This is the first-run sequence from my hands-on walkthrough.
GuidesSeele AI for 3D Printing: What Worked and What Needed Fixing
I tested Seele AI with a game-style knight and a functional pen holder to see where text-to-3D worked, where it needed iteration, and what still had to happen in the slicer.
PrintersCreality SparkX i7 CFS Nano Conversion: Keep CFS Lite or Switch?
I swapped my existing Creality SparkX i7 from CFS Lite to CFS Nano to see what changes in the real workflow, including footprint, feed routing, stability, and multicolor use.
PrintersAnycubic Kobra X Review After One Week: Print Results and Trade-Offs
After a week of PLA, PETG, TPU, and four-color prints, this hands-on Anycubic Kobra X review covers what worked, what needed correction, and what still needs testing.
AccessoriesArtilume A4 7W Laser Engraver Review: Rotary Setup and Test Results
I tested the Artilume A4 7W laser engraver with its rotary workflow on flat samples, a stainless-steel dog tag, and a tumbler. Here is what the first hands-on session shows.
GuidesCreality MakeNow Guide for the SparkX i7: CubeMe, SnapForm, and Sign Generator
See how I used Creality MakeNow with the SparkX i7 to create a CubeMe avatar, SnapForm pet project, and custom sign—plus the slicer checks that matter.
PrintersAnycubic Kobra X Setup and First Print: What I Found
A hands-on Anycubic Kobra X setup guide covering assembly, app setup, guided calibration, first multicolor prints, and the practical trade-offs still worth testing.
GuidesBest 3D Scanner for 3D Printing: My Tested Pick for Most Makers
A practical 3D scanner buying guide built around real scan-to-print tests. See why the Revopoint POP 4 is my pick for most hobbyist workflows, plus the limits to understand before buying.
AccessoriesRevopoint Inspire 3D Scanner Setup: First Scan and Initial Thoughts
A hands-on Revopoint Inspire setup and first-scan workflow covering calibration, Revo Scan settings, mesh cleanup, STL export, and the limits of an early test.
AccessoriesFIXDRY NT1 Filament Dryer Review: Dual-Spool Setup, Humidity Results, and Dry Box Use
A hands-on FIXDRY NT1 review covering the dual-spool setup, large-spool capacity, controls, humidity readings, dry-box workflow, and practical tradeoffs.
AccessoriesCreality Space Pi Filament Dryer Review: Setup, Humidity Results, and Who It Fits
A hands-on Creality Space Pi review covering the single-spool setup, front controls, humidity monitoring, noise, and the workflow it fits best.
PrintersBest 3D Printer for Beginners in 2026: A Practical First-Printer Guide
Choose a first FDM 3D printer by your actual workflow: guided setup, compact space, multicolor projects, or a step-up enclosed machine. Compare current options and their tradeoffs before buying.
PrintersBest 3D Printers Under $1,000 in 2026: Current Enclosed and Multicolor FDM Picks
A current FDM buying guide for makers ready to spend up to $1,000: compare enclosed material capability, multicolor workflow, larger projects, and the difference between hands-on coverage and catalog research.
PrintersBest 3D Printers Under $500 in 2026: Enclosed, Multicolor, and Easy-to-Use Picks
The meaningful upgrades under $500 are not just speed claims. Compare current enclosed CoreXY machines, multicolor systems, material limits, and established alternatives before you buy.
PrintersBest 3D Printers Under $300 in 2026: Current FDM Choices for First Prints
A practical current shortlist for first-time FDM buyers: compare setup, footprint, multicolor expectations, material limits, and the support content available before choosing a printer under $300.
PrintersBest 3D Printers in 2026: Current FDM Picks by Project and Workflow
Choose a current FDM 3D printer by the work you want to do: first prints, multicolor models, enclosed materials, or larger functional projects. Every recommendation explains its fit, tradeoffs, and where to check current availability.
ReviewsCreality SparkX i7 Unboxing, Setup, and First Prints: What to Know Before You Buy
A hands-on Creality SparkX i7 setup guide covering unboxing, CFS Lite tube routing and filament loading, firmware, Creality Print, the 32-hour Arctic Dragon test, and first-print checks.
AccessoriesAIScan 01 Detailed Review: Real-World 3D Scan Tests, Settings, and Limits
A hands-on AIScan 01 detailed review across ceramic, black plastic, chrome, coins, glass, tools, and small electronics—plus the scanning settings, marker workflow, spray use, and cleanup expectations that matter.
ReviewsCreality SparkX i7 Review After One Week: Real Prints, Trade-Offs, and Verdict
A hands-on Creality SparkX i7 review after a week of near-continuous printing: CFS Lite workflow, real print results, RFID firmware fix, purge waste, and who the open-frame printer suits.
PrintersUgee FunBox Review: A Hands-On Kids 3D Printer Test
A hands-on Ugee FunBox review covering setup, adult supervision, the kid-friendly app, AI Mini Me, first prints, and the one filament-loading lesson to teach early.
AccessoriesRevopoint POP 4 First Look: AI Segmentation and No-Spray Coin Scans
A hands-on Revopoint POP 4 first look covering the box contents, AI segmentation on a small statue, and laser scans of reflective coins without scanning spray.
AccessoriesRaymoto A1 Review: First Look at a Portable 7W Laser Engraver
I tested the Raymoto A1 portable 7W laser engraver on wood, leather, stainless steel, stone, and clear acrylic. Here is what worked, what did not, and where the mobile-first workflow gets in the way.
PrintersFlashforge Creator 5 Pro Setup Checklist and First-Print Settings
Use this Flashforge Creator 5 Pro setup checklist to establish a clean first-print baseline before changing speed, temperature, or slicer settings.
PrintersFlashforge Creator 5 Pro Review After One Week: Real Print Results and Trade-Offs
A hands-on Flashforge Creator 5 Pro review after one week of PLA, wood-filled PLA, ABS, TPU, and multi-material tests - including the strengths, maintenance, and workflow trade-offs to know.
PrintersFlashforge Creator 5 Pro Setup and First Prints: Step-by-Step Guide
Set up the Flashforge Creator 5 Pro with this hands-on guide to unboxing, tool-head assembly, calibration, loading four filaments, and first multicolor prints - plus the early limitations to know.
Guides5 Creality SparkX i7 Upgrades Worth Printing First
Five practical printable upgrades for the Creality SparkX i7 Combo: a filament catcher, build-plate scraper, CFS Lite stand, silica-gel holders, and cable guides. These improve daily use, not stock print quality.
AccessoriesxTool P2: 5 Beginner Projects You Need to Try First (With Full Settings)
If you just picked up an xTool P2 — or you've had one sitting on your bench and aren't sure where to start — this guide is exactly what you
EducationAIScan 01 Unboxing & First Print: Is This the Easiest 3D Scanner Yet?
3D scanning technology has been around for a while — but it's mostly been inaccessible to hobbyists. The scanners that do exist for the hobbyist market require you to connect
PrintersBambu Lab X2D One-Week Review: Real Prints, Dual Tool Head, AMS, and Tradeoffs
My hands-on Bambu Lab X2D one-week review covers the real prints I ran, AMS and TPU limits, dual-tool-head time and waste savings, remote monitoring, and who the machine fits.
PrintersBambu Lab X2D Setup: Unboxing, AMS Installation, Calibration, and First Prints
A source-based Bambu Lab X2D setup guide covering the unboxing checklist, AMS and tubing installation, first calibration, Bambu Studio setup, and the first prints I showed in the original video.
EducationThe Best Alternatives To OctoPrint
When it comes to controlling and monitoring your 3D printer remotely, OctoPrint is the most popular open-source software out there, but it’s not the only one. Whether you're looking for
AccessoriesCreality CR-Scan Ferret Pro Setup: Desktop, Mobile, and First Scan
Set up the Creality CR-Scan Ferret Pro for desktop or mobile scanning, use markers for difficult objects, clean the mesh, and export a first printable STL.
AccessoriesMeet Creality Falcon2 Pro 60W, The First 60W Enclosed Laser Engraver Cutter
CrealityFalcon Is Founding! Over the years, the technology behind laser engraving has seen significant advancements, with machines becoming more efficient, compact, and powerful. Yet, for all its benefits, there are
AccessoriesCR-Scan Otter: A Highly Versatile 3D Scanning Solution
The CR-Scan Otter is a multipurpose 3D scanning system that can be used for both personal and business purposes, according to Creality's CR-Scan series. The affordability and ease of use
ReviewsFast Printing PCB – Factors How to Make it Perfect!
Are you looking for a company that can provide you with the best Fast Print PCB products? Do you need someone to increase the value of the product significantly during the
PrintersTwoTrees SK1 – Unboxing and First Print
The TwoTrees Sk1 is a new 3D printer on the market with a lot to offer. I’ll walk you through the unboxing, basic setup, calibration, and first print. The TwoTrees
AccessoriesAlgoLaser Delta 22W Laser Engraver : A Budget-Friendly Machine For Makers
New Tools to Inspire Creativity As a consultant in the 3D printing space, one of my goals is to help fellow makers discover affordable tools and technologies that can unlock
AccessoriesCreality CR-Scan Ferret Pro: Versatile for All Use Cases and Users
The CR-Scan Ferret Pro offers wireless scanning with 0.1mm accuracy, anti-shake technology, and full-color capture. (Sponsored Content) In recent years, 3D scanning technology has emerged from the specialized confines of
PrintersEnder 3 VS Ender 5
It might be obvious that the Ender 5 is an improvement over the Ender 3, but are the improvements in areas where you really need them? The Ender 3 is
PrintersIs the Ender 3 Worth It? Details Inside?
The Ender 3 is one of the most well-known beginner 3D printers. It’s generally regarded as the go-to entry-level 3D printer and has a good reputation. However, I wanted to
AccessoriesDo All 3D Printers Come With Filament?
If you're in the market for a new 3D printer, you're probably wondering if you should buy extra filament to go with it. Although you'll have to purchase filament sooner
AccessoriesCR Touch Installation on Creality 32-Bit Boards: Compatibility, Firmware, and Z-Offset
Install a CR Touch on a compatible Creality 32-bit board with a verification-first workflow: identify the board, use matching official firmware, set Z offset, and test the first layer before changing Cura.
PrintersEnder 3 Bed Size (Details Inside)
The build volume of your printer is one of the most important factors in determining what you can and can't print. If you don’t want to stick multiple parts together
AccessoriesOctoPrint Bed Level Visualizer – Complete Setup Guide!
Install and use OctoPrint Bed Level Visualizer to run a bed mesh, interpret the result, and tell the difference between a tilted bed and a warped one.
AccessoriesEnder 3 Pro Glass Bed Upgrade – Complete Guide!
Some people have asked me whether a glass bed is actually an upgrade. In my opinion, the answer is yes for a few reasons. One of the most obvious reasons