One of the loudest components on a 3d printer isn’t one you would typically think of and is not on all the time but gets kicked on by the power supply when needed. I'm talking about the fan in the...
Posts by Rob
The technology around 3d printers has changed significantly over the last several years, especially for the mainboard. The mainboard is the heart of a 3d printer and is responsible for controlling...
Setting the z-offset correctly is arguably one of the most challenging parts of installing a BLTouch, but it's also the most important. If it's not done correctly, you will end up with first layer...
Setting the z-offset correctly is arguably one of the most challenging parts of installing a BLTouch, but it's also the most important. If it's not done correctly, you will end up with first layer...
When someone buys a new piece of technology, the first thing they tend to do is plug it in and start using it. Updating things like the firmware tends to get ignored most of the time, but it...
One of the most challenging parts of setting up a 3d printer is getting the bed leveled right and keeping it level between prints. Some of the more expensive printers have a built-in auto bed...